Hi everyone! Guess what? I have a new sewing machine!
And it’s actually new!
So obviously it’s from Singer and it’s mine until they give me something else.
But don’t get too green with envy ok?
(Hehe, see what I did there?)
Because guess what? My machine is green and you’ll be tickled pink when you see the raspberry version I have to give away to one lucky NZ reader!
Keep reading… 🙂
So what’s this machine all about? It’s a Singer Simple 3223, an entry level mechanical sewing machine aimed at beginners and here in NZ it comes in green (ok, aqua) and raspberry.
Now let’s address the elephant in the room. I am not a beginner sewist. At the most you might catch me calling myself advanced intermediate. So you might be thinking, why did they give you this machine? Good question!
When I think about my current machine (it’s not a Singer, so we won’t talk about it in too much detail, you understand…) it’s not particularly fancy either. It has a lot more stitches than the Simple but really what stitches do you actually use for garment sewing? I use straight stitch, zig zag, blind hem, I insert zippers, I sew on buttons (because I hate hand sewing) and I make button holes.
That’s pretty much it.
So what can the Simple do? Well, it does straight stitch, zig zag and blind hem. It can insert zippers, sew on buttons and make button holes!
Tick, tick, tick…tick!
I’m going to give you a quick review because I’ll be sewing my next Singer Sewing project solely on this machine and then I’ll be able to give you a better idea of what it’s like to “live” with in a future post. Fluffing around on fabric scraps is fun but sewing an entire garment? That’s a real test of endurance!
The Singer Simple 3223 is a fun, retro looking mechanical sewing machine aimed at beginner sewists. It would also make an excellent backup or travel machine, it’s got a great price tag and it’s pretty colours really stand out among all the white and grey machine options.
I got to choose what colour I wanted and I really struggled. I can tell you what I think of this machine but I am afraid you’re on your own when it comes to choosing which colour!
It arrived in a colour matched box (squee!) and was very well protected, snuggled in a polystyrene inner and plastic bag. Immediately inside the box was the instruction manual and DVD, a dust cover and the electronic foot.
First impressions: It looks like a typical mechanical sewing machine but very pretty. The knobs and machine markings are colour coordinated, there is a thread cutter on the side of the machine and it has a front loading bobbin. The standard presser foot is attached (snap on) and the front sewing bed is nice and deep.
Inside the accessory compartment was a nice selection of standard accessories. There were a couple I didn’t recognise so I had to look them up! They turned out to be a fancy shaped screw driver, a darning plate (to cover the feed dogs in place of being able to lower them) and two different thread spool caps.
The full list of standard accessories is:
- All purpose foot
- Zipper foot
- Buttonhole foot
- Button sewing foot
- Seam ripper/brush
- Edge/quilting guide
- 2x Spool holder caps
- 3x Bobbins
- Darning plate
Ok, Harriet has approved the new addition, now let’s sew!
First thing I noticed was that the thread spool sits sideways and that’s what the caps are for! It might seem strange for me to point that out but this is new for me.
Secondly, I didn’t even need to glance at the manual to start filling the bobbin (in Singer red, of course!). Threading and bobbin winding threading sequence is nicely indicated on the top of the machine with arrows and numbers without being too “Fisher Price” obvious.
I did check about declutching! Unlike most machines I’ve used you don’t need to pull the handwheel to declutch, it’s automatic once you push the bobbin over against the bumper. With a full bobbin I threaded up following the markings, it’s all pretty conventional.
If you do need the instructions they are filled with lots of great diagrams and there is even a DVD if you learn better that way.
I started out sewing on some calico and went through each stitch option before trying out the 4-step buttonhole. Apart from the zig-zag stitch, you can change the stitch length but not the width. All the stitches were really neat and straight and there are 23 of them to choose from including the stretch stitches.
I posted a pic of my first sewing trial on Instagram and was immediately asked if the machine could sew denim. That sounded like a good test to me! I dug out some denim and changed to a jeans needle.
I folded the denim so I had a section each two and three layers thick (because who sews just one layer?!) and started with standard thread for straight stitch and triple straight stitch. It looked good, no complaints from the Simple so far and this denim is fairly thick, I use it for patching. Next I switched out the top thread for a heavy duty top-stitching thread and repeated the process.
Single and triple straight stitch looked great and even the decorative stitches sewed fine! The Simple didn’t sound like it was under any duress and I only had to tweak the tension a little.
I was on a role now so I switched back to standard thread and changed the needle to stretch. I found some cotton knit and tested out the zig-zag and stretch stitch options. No problems again and the fabric stayed nice and stretchy without popping any stitches.
This little machine actually really impressed me! I honestly didn’t think it would eat the denim so easily and if I am brutally honest I did not have particularly high hopes for stretch sewing…but it proved me wrong and lives up to the long standing Singer name.
Ok but it can’t be all roses right? No, it cannot. But they aren’t total deal breakers as you will see. Remember this machine sells for only a little over NZD$300 (on special until the end of May for just NZD$299) and as we’ve already seen it’s pretty capable….and also really pretty.
First thing I noticed: No number markings on the needle plate. It’s broken down into 1/8th lines but they aren’t numbered. I was quite surprised when I first noticed this because seam allowance is a really important thing to keep track of as a beginner…and always. Plus I would expect a machine marketed to NZ/Aus would have both metric and imperial markings. Needle plates are removable and therefore replaceable…and that’s the subtle hint I dropped at Singer.
Has it stopped me sewing? No. I’ve started my next project already and I’m using my magnetic seam guide to keep my stitching in the right spot. Another option would be to use pretty washi tape, you can relocate it as needed and I‘d be lying if I said I’ve never done that myself on my other machine. Several times I’ve had tape markings on the plastic bed halfway between the needle plate and the upright arm!
Secondly, the bobbin door is spring loaded and opens just short of completely flat. You can’t fold it much further down because it gets hung up a piece of plastic that sticks out. It’s not a big deal but at first I found it a little awkward to put the bobbin in. This is also possibly a result of the extra deep sewing bed which is a good feature for new sewists. Hey, you can’t please everyone! I do have pretty big hands and I’m just used to a bit more room on my other machine, anyone else might not even notice 😉
That’s kind of it…so what’s next? Well I’m currently sewing a dress out of very naughty slippery fabric so that’ll be a good challenge for the Simple and then a new coat for winter…that’s a big ask right? But I think she’ll be ok…watch this space…
Now, to thank you for reading my little Singer Simple 3223 review I have the pleasure of giving away a raspberry version of this machine to one lucky NZ reader. So exciting!
To enter jump on over to the Singer NZ Simple 3223R product page to learn more about the machine, check out the description (big hint drop). While you’re there look out for the special competition code (you’ll need it to fill out the entry form – it is not the sewing machine’s model code!) then just hit the button below!
Sorry this competition is now closed.
What do you think of the new colourful Singer machines? I’d love to hear all about your current machine (or lack of…), tell me in the comments below 🙂
Good luck everyone!
I was given the Singer 3223G Simple Sewing Machine you see me using in this post to review as part of my work with Singer Sewing Company Australia New Zealand. All opinions expressed in this post are honest and my own. I freely chose to review this product because I genuinely believe it is a good product, I enjoyed using it and will continue to use it in the future. My samples were stitched on calico, denim and cotton knit using Singer Universal, Jeans and Ball Point needles, Gütermann 100% Polyester Sew All and 100% Polyester Extra Strong M782 thread.